In this research the influence of sand grading on the air void system in mortar is determined. Three sand grading types are defined: sand low, sand mean and sand high. The difference is the amount of fines, < 250 ?m, (low, mean and high amount of fines) in the sand....
Guidelines for Bus Stops in Concrete in the Netherlands
New legislation for improving accessibility to buses by people and especially disabled people led to the modification of bus platforms and particularly the kerbs at these platforms. Buses should be able to approach quite close to these platforms. This depends on the design of the bus stop area. The dimensions...
Determination of the Behavior of on Site Pavement Recycling with Cement
On site pavement recycling with cement is the most sustainable restoration technique, by means of which a degraded pavement is transformed into a consistent and more homogeneous structure, using the road as a source of aggregates. Both bearing capacity and homogeneity are therefore considerably improved. Due to the absence of...
Comparison of Roadway Jointed Plain Concrete Pavement Thickness Design Methods Common in the United States
While much research in the United States (U.S.) has focused on the development, enhancement, and sensitivity of the AASHTOWare Pavement ME Design (previously known and MEPDG and DARWin-ME) method, little work has focused on comparing the results from this design method to other design methods already regularly used in practice....
Improvements to the Construction Process for Semi-Rigid Pavement Rehabilitation on Mexican Highways
The Mexican Federal Government has allocated a great deal of investment to the maintenance of pavements across the existing road network (in 2010 and 2011, this investment amounted to 7,860M and 7,894M respectively). During the 1990s, a pavement system was introduced in Mexico involving the incorporation of Portland cement using...
Surface Grinding Concrete Pavements
The report outlines some of the perceptions and issues associated with Concrete roads, and asks if the process of Diamond Grinding is a viable solution to the refurbishment of worn concrete pavements. The paper outlines the process of Diamond Grinding for reconditioning structurally sound but worn concrete surfaces. Gives a...
Quality and Optimal Grading of Sand for Optimal Performances of Concrete Pavements
The quality of sand influences in every way the quality of concrete and affects, among others, the workability, the durability as well as the mechanical strength of concrete. It is acknowledged that a sand of good quality to be used in concrete pavements must contain few fine grains and be...
Influence of Recycled Concrete Aggregates on Strength Properties of Concrete
The demand to use recycled aggregates in concrete is getting more important. However, to obtain a sustainable road, it is necessary to construct durable pavements and therefore to use concrete of good and reliable quality. The use of recycled aggregates will give environmental advantages but could lead to excessive shrinkage...
Restrained Shrinkage Cracking of Continuously Reinforced Self-Consolidating Concrete Roads
Continuously Reinforced Concrete Pavements (CRCP) are designed in such a way that the longitudinal reinforcement limits the widths of the transverse cracks in the pavement in order to prevent the water, chemicals and deicing salts from penetrating into the pavement. Self-Consolidating Concrete (SCC) is a new and innovative concrete type,...
Building Concrete Roundabouts in Switzerland
Since 2003, roundabouts in Switzerland have been built with concrete carriageways. Because space is at a premium due to the population density, the diameter of most roundabouts is less than 30 m. Roundabout carriageways with small diameters are subject to particularly high shear stress levels, which is why the choice...
Impacts of the Longitudinal Joint Location on Slab Stresses
Longitudinal joints in concrete pavements historically have been located along the edges of lane lines, a condition that results in applied loads being located at the most critical points (e.g., edges and corners of slabs). With increasing use of light?colored silicone sealants that contrast less with the concrete surface color,...
Skid Resistance-Improvement Measures on Concrete Roads in Austrian Road Tunnels
The results of the investigation concerning the loss of skid resistance on Austrian tunnel roads are presented in this poster as well as the results of trials to improve the skid resistance level in the laboratory. Best results were achieved through cleaning the road surface in the tunnel with tailor...