Aggregates from crushed road concrete were tried in 7 test sections, and 84 samples from some lOcrushing plants were :ested in the laboratory. lt has been shown that aggregates suitable for re-use in sub-Jases or road bases can be produced not only in fixed plants butalso by small mobile crushers,...
Reuse of Crushed Concrete as a Road Base Material
Cement Concrete Characteristics For Road Pavements Practical Experience with the Polyfunctional Composite Pavement (Pcp)
A stretch of the slip-road between the Al and A2 (Fiano tomano-S. Casareo) has been made of PCP (polyfunctional .omposite pavement). The system is "composite" owing to the rresence of several layers: mix cemented to cement binder, :ontinuous reinforcement concrete slab and bituminous layer; 'polyfunctional" owing to the diverse functions...
Roller-Compacted Concrete as a Road Building Material in South Africa
Roller-compacted concrete (ReC) offers a solution to the vast number of good quality lowvolume roads which will have to be provided in the near future to accommodate South Africa's rapidly expanding rural road needs. The research effort presented in this paper involved a laboratory study and the construction and accelerated...
Pavements with Industrial By-Products Technological Environmental and Constructive Aspects
Recyclingmaterials and industrial by-products are suitable for building purposes if the constructions made of them adequately withstand all loads occuring during the scheduled period of utilization and if they do not affect the environment unac-ceptably. Therefore the evaluation of recycling-and secondary materials must cover both the cons-tructional and the ecological...
The Application of Foamed Concrete For Pave~1ent Structures
In areas with a low bearing capacity of the soil it is very hard nd expensive to manage and maintain the road system. In eneral the common pavement structures are not able to resist uring its lifetime the deformation of the subsoil caused by the eavy weight of pavement structures....
Materials Used in the Experimental Field in La Guardia Toledo For Marking Roads in Concrete Pavements
lith the aim to verify the suitability of the different materials sed in marking roads for concrete pavements, more than 30 ommercial products were tested on the experimental field. Iaterials were of different nature: based on alkyd resins, vinyl .sins, alkyd-chlorinated rubber, chlorinated rubber, acrylic sins, etc. efore the application,...
Characterization by Means of Some Fracture Mechanics Parameters of the Concrete Pavement of the By-Pass Between Al and A2 Italian Highway
This work reports the results obtained with the three point bend tests (TPBT) carried out on beams made up of the concrete used for the construction of a by-pass highway and, by comparison, of medium (50 N/mm2) and high strength (98 N/mm 2) laboratory concretes. Typical parameters of fracture mechanics,...
The Influence of Size and Hardness of Sand Particles and their Proportions on the Skid Resistance of Cement Mortars
irnestone and emery sands divided into 6 fractions, were used ,cast cement mortar specimens in PSV moulds. After 28-day ater curing the specimens were subjected to accelerated ilishing and their Skid Resistance Value (SRV) was measured ith the pendulum tester. Specimens of 100 % limestone or )0 % emery sand,...
Superplasticised Concrete For Urban Paving
Concrete made with a superplasticiser has been used in Germany in the field of paving since the middle of the seventies. If these concretes of high workability show a high strength at a young age, they are called high early strength. These concretes can be subjected to high loading on...
Study of Long-Lasting Materials and Conventional Paints on Concrete Surfaces
Due to the increase of concrete use in road cons-truction, the report examines the influential fac-tors on the three most important properties in roadmarking, above all on concrete pavements.The analysed properties are:- Night visibility.- Day time visibility.- Skid resistance.The study makes a comparison of two systems:two components system (plastic of...
The Passage of State Roads Through Built-Up Areas. Applications of Concrete Block Pavements
In the eighties, a campaign was set up in Belgium in view of the rearrangement of the state road sections which are passing through built-up areas. These projects were meant to improve the road safety and the viability along these cross town links. Efforts were made to come to a...
High Strength Concrete For Highway Pavements Ano Bridge Decks
An accelerated road-wear simulator employed by Norcem for experimental testing of abrasion resistance of highway concrete pavements subjected to heavy traffic by studded tyres was set up at Slemmestad, Norway in 1985. By increasing concrete strength from 50 up to 120 MPa, the abrasion was reduced by roughly 60-70 %....