Resources

Colombia is a developing country with enormous difficulties for the implementation of new technologies due to their introduction costs and the positioning of existing ones. Despite the constant academic efforts to keep it alive, the construction of concrete pavements has been asleep for years as a consequence of the obsolescence...

This article describes the Slovenian experience with PCC technology on four different sites with different requirements and for different purposes. The job mix formulas and the different application possibilities are described. Paver compacted concrete (PCC) is a relatively new construction method which was evaluated from roller compacted concrete (RCC) technology....

A study has been conducted in order to determine the influence of a wide range of factors on the properties of roller compacted concrete (RCC): coarse aggregate type and content, addition of fly ash, chemical admixtures type and quantity, technologies of manufacturing and compaction, tranportation time and concrete curing. The...

A roller compacted concrete pavement (RCCP) reinforced with continuous steel bars was recently developed at the New Tokyo International Airport. The construction is fast and the effectiveness of load transfer at cracked sections of the continuously reinforced concrete pavement is high. This RCCP was built in two layers. Steel bars...

This study was carried out to examine the correlation between roller compacted pavement concrete mixes and the compactability with surface vibrator. Two factors are significant for the consistency of the concrete: the sand/cement ratio of the mortar component by weight and the coarse aggregate/ mortar ratio by volume. The most...

Roller compacted concrete (RCC) began to be used in Spain in 1984 on roads bearing heavy and medium traffic. Up to now more than 250 km of RCC pavements have been constructed. A significant portion is subjected to the combined effect of heavy traffic and servere temperature gradients. Joints are...

Roller compacted concrete pavements (RCCP) are favourable for port yards. To develop the design, both the bearing capai-ity and the load transfer efficiency at the joints were studied. An experimental pavement with two different RCCP structures was built: namely, one that follows the ordinary design method for port yards consisting...

Roller compacted concrete (RCC) pavements are expected to be an economic and rational concrete pvPmAnt system that will become increasingly popular in Japan. The maximum thickness of a RCC slab completed in one layer is limited to 25 cm because of limitations in the compactability of the concrete and the...

"MAIA" is a slotted driveable gutter used for the drainage of motorways and airports. T.S.S. adapted the SATUJO slotted gutter method to be realized on a slipform paver. The new concept is based on the insertion of an air inflated reusable flexible tube on a slipform paver which enables the...

Conventional concrete safety barriers of the New Jersey type are frequently used in Belgium. At the end of 1993 more than 1600 km had been placed. Slightly higher precast safety barriers connected by a Swedish system have been successfully used especially to separate the traffic during reconstruction works of a...

This paper examines the influence of the different factors that affect the problem of the collisions against the concrete safety barriers used to delimit the area of approach to narrower carriageways. In particular we have studied the influence on the damage of the vehicle and the shear strength necessary in...

The changes in the landscape happened during the last 40 years due to human activity have produced a slow change of mind. Therefore it is no wonder that also for road construction nature is taken more into account. The Concrete wheel track is a compromise. Firstly it prevents from covering...