Resources

The airport of LiOge in Belgium has been the subject of major works for several yearjSince the country was regionalized a few years ago, the Wlloon Region has invested over 1,5 milliard Bel g ian francs. Several new buildings have already been constructed.rThe most spectacular wor, however,lTs the enlargement of...

The use of CD 40-A cement eliminates the classical procedures of measuring plastifying and air entraining additives at the preparation on site of the road concrete. The article presents the main characteristics of CD 40-A and the results of laboratory tests carried out to establish the influence of this type...

The problem of using fine-grained (sand) concrete instead of the "classic one in the construction of road and airfield pavements is analysed. In sand concrete the coarse aggregate, crushed stone or gravel, are substituted by natural sand or a blend of natural sand and screenings 0.5 (10) mm. The use...

Airport runways and other aircraft movement areas are among today's most important infrastructure elements. The paper gives an introduction to general aspects of design and construction of concrete airport pavements, emphasizing the advantages of the two-course "wet on wet" placement technique. The above mentioned aspects are illustrated by the description...

This paper examines the results of temperature and strain measurements obtained using strain gauges installed in the concrete pavement of the aircraft parking area of the "Marco Polo" international airport of Venice. The purpose was to control the design assumptions and models and to assess the long term behaviour of...

Results of a rehabilitation project for the runway nr.1 of the Otopeni Airport at Bucarest by using the Falling Weight Deflectometer (FWD). The paper describes how the deflection basin produced by the FWD can be used to characterize the pavement behaviour and to backcalculate the Young modulus (E) of the...

Owing to its anti-kerosene properties, its resistance to heat and punching, concrete is always used in the tarmac of the runway threshold of military airports and in the aprons of large-sized aircrafts in civil airports. Due to the strong competition with flexible structures, concrete is at disadvantage as far as...

Since the overlay thickness must be decided considerinq the structural condition of the existing pavement, FWD was introduced to evaluate the mechanical properties and to obtain input data for the overlay design. In the case of concrete overlays for concrete pavements, the overlay thickness depends on the existing slab thickness...

Session Paper Indexes, Opening Addresses, General Reports, Oral Contributions and Closings from the 6th International Symposium on Concrete Roads 1990 Madrid Spain

The construction of the International Airport MUC 2 and especiallyof the flight operation areas in -for road designers- gigantic dimensions and short time-limit was a unique chance for the ex-perts to search for and find newstandards for tech-nique, economy and quality by an innovative fur-ther development of proven equipment and...

The rapid reconstruction of concrete slabs on airfield runways is a technology presented to airports operation authorities in order to strictly shorten the reparation period when the runway is unpracticable. The French airports and airbases engineering services proceeded with two demonstration works on the BORDEAUX and NlMES airports. The reconstruction...

Closing ceremony from 5th International Symposium on Concrete Roads 1986 Aachen Germany