Skid resistance properties of concrete pavement surfaces in tunnels are measured with the dynamic measuring device TRT on a regular basis in the Czech Republic. Measurements are usually carried out before and after putting the tunnel into operation and then approximately once a year; the skid resistance is also measured...
Skid Resistance Properties of Concrete Pavement Surfaces in Tunnels
Re-use of Marginal Aggregates in Cement Bound Mixtures for Pavement Foundations
The paper reports the results of an experimental study aimed at designing cement bound granular mixtures for pavement foundations, made exclusively with marginal materials, namely electric arc furnace steel slags, ladle furnace slags, waste foundry sands, glass wastes and coal ashes, used with different proportions. The laboratory investigation has been...
Super Fast Concrete Repair System for Roads Airfields and Railways Based on a Special Cement for Infrastructure Projects
From both an environmental and economic point of view, the availability and performance capability of infrastructure traffic areas today and in the future is of the highest priority. This applies to both public and private roads and air traffic areas, as well as for busy parking and logistics areas and...
Concrete Pavement Preservation Integrating Engineering Application and the Environment
Concrete Pavement Preservation (CPP) is a series of engineered techniques developed over the past 40 years to manage the rate of pavement deterioration in concrete streets, highways and airports. CPP is a non-overlay option used to repair areas of distress in concrete pavement without changing its grade. This rational, preventive...
Environmental Product Declaration of Czech Cement
This paper explains the basic concepts, history of studies and the results of the Life Cycle Assessment (LCA) of the Czech Cement and Environmental Product Declaration (EPD) of the Czech Cement. The Environmental Product Declaration is based on the method of life cycle assessment, which generally evaluates the impact on...
Multi-Funcional Noise Reducing Pavements Made of UHPC – Materials Design and Construction Technology
The constantly rising traffic volume is leading to high mechanical stress of the pavements. As a result, the requirements of maintenance, refurbishment and renewal are increasing. In contrast to this, financial resources are decreasing constantly. Moreover, the increasing traffic noise emissions are experienced as growing stress. New, highly sustainable and...
Noise Emission of Concrete Pavement Surfaces Produced by Diamond Grinding
In Germany, diamond grinding is frequently used to improve the evenness and skid resistance of concrete pavement surfaces. Since diamond grinding has been observed to affect tyre / pavement noise emission favourably, the relationship between surface texture, concrete composition and noise emission of concrete pavement surfaces has been systematically investigated....
Skid Resistance-Improvement Measures on Concrete Roads in Austrian Road Tunnels
The results of the investigation concerning the loss of skid resistance on Austrian tunnel roads are presented in this poster as well as the results of trials to improve the skid resistance level in the laboratory. Best results were achieved through cleaning the road surface in the tunnel with tailor...
Abrasion Resistance and Transport Properties of Road Concrete
Abrasion resistance and impermeability are vital in road concrete. In this experimental study the compressive strength, abrasion resistance and transport properties of the road concrete were investigated. In order to study transport properties, water sorptivity and depth of penetration of water under pressure were taken into consideration. For this purpose,...
Influence of Test Specimen Compaction and Curing Condition for Pavement Cold Recycled Mixtures
Presently in most European countries the quality of cold recycling mixtures in pavement rehabilitation is proven by achieving required strength values (indirect tensile strength or compressive strength) and eventually by values of stiffness modulus (IT-CY test method). This empirical approach of quality assessment is quite simple, relatively fast in performance...
Concrete Pavement Contribution to Fire Safety in Road Tunnels
In recent years, several high-profile road tunnel fires have taken place across Europe. These fires inevitably led to important structural damages and even loss of lives. In all of these tunnels, national mandatory safety regulations were implemented. Nevertheless, disasters could not be averted. Apart from a deep knowledge of safety...
Probabilistic Life-Cycle Cost of Pavements Characterization and Application of Parameter Input Variation for Scenarios
Life Cycle Cost Analysis (LCCA) evaluates the economic performance of alternative pavement investments. Currently, practitioners treat input parameters as static, deterministic values, which although computationally simpler, will hide the implicit uncertainty underlying the analysis. Over the past decade, an emphasis has been placed upon accounting for uncertainty by treating input...