Materials

The A76 is the corridor between the Ruhr area (Germany) and Antwerp (Belgium) in the southern part of the Netherlands. It was built in 1985. Because the asphalt pavement failed as a result of a geological fault in the subsurface, a CRCP with a toplayer of porous asphalt was chosen....

The paper reports the results of an experimental study aimed at designing cement bound granular mixtures for pavement foundations, made exclusively with marginal materials, namely electric arc furnace steel slags, ladle furnace slags, waste foundry sands, glass wastes and coal ashes, used with different proportions. The laboratory investigation has been...

This paper explains the basic concepts, history of studies and the results of the Life Cycle Assessment (LCA) of the Czech Cement and Environmental Product Declaration (EPD) of the Czech Cement. The Environmental Product Declaration is based on the method of life cycle assessment, which generally evaluates the impact on...

The quality of sand influences in every way the quality of concrete and affects, among others, the workability, the durability as well as the mechanical strength of concrete. It is acknowledged that a sand of good quality to be used in concrete pavements must contain few fine grains and be...

The constantly rising traffic volume is leading to high mechanical stress of the pavements. As a result, the requirements of maintenance, refurbishment and renewal are increasing. In contrast to this, financial resources are decreasing constantly. Moreover, the increasing traffic noise emissions are experienced as growing stress. New, highly sustainable and...

In the last few years at several airports cracking in the internals of concrete gutters has been detected. This was mainly observed, where large airfields (about 60 to 100 m in length) are located next to these drainage lines. In order to reveal the influences on this cracking both laboratory...

A frequently noted disadvantage of cement concrete pavements is repair time. For further application of this technology, it was necessary to eliminate this disadvantage and significantly reduce repair time. Therefore, Skanska developed the "Fast-setting concrete technology". In-house development commenced in 2005. MC Bauchemie, design engineers and investor representatives also participated....

The ability to spatially map the stiffness of the foundation layers under concrete pavements with intelligent compaction has created a need to define limits on the allowable stiffness variations in a given construction area as well as the maximum size of a non-complaint area which does not require remedial action....

In 2007 the Cement Association of Canada, industry members and the Centre for Pavement and Transportation Technology at the University of Waterloo partnered to carry out a study to evaluate the behaviour of pervious concrete pavement in the Canadian climate. Field sites have been constructed and monitored and laboratory testing...

As part of the Ministry of Transportation Ontario (MTO) drive to pursue innovation and have the “greenest” roads in North America, MTO is actively pursuing the use of pervious concrete pavement. Pervious concrete provides many environmental benefits and is recognized as a stormwater management best practice. There is also strong...

Pervious concrete pavement is drawing increasing attention for its high content of interconnected voids which is expected to reduce the environmental impact as concrete is often counted as a causal factor of the urban heat island phenomenon.  Performance of pervious concrete can be measured by water permeability, water  retentivity and...