This paper will summarize results from a major research project on the repair of jointed concrete pavements in the USA. The study approach involved: (I) a comprehensive evaluation of current and new alternate methods of joint/crack repairs, (2) selection of the most promising techniques, (3) the development of design and...
Cost- effective restoration of jointed concrete pavements
Use of cement-bound industrial wastes and recycled materials in earthworks and road construction
For environmental reasons, it is becoming increasingly difficult and eherefore expensive to find fresh sites for wasee disposal. Investigations have shown that coal fly-ash, refuse incinerator grate ash, demolished road asphalt and concrete rubble can, when suicably treated with cement, be economically reused for road construction, for which purpose they...
Concrete pavement constructed in extreme atmospheric conditions
In a Spanish road in the main network that joins Zaragoza with Huesca, a 9 km long by~pass is being built, in order to supress two railway grade crossings and improve the location. The structural section consists in 15 em of lean concrete and 25 cm of pavement concrete. By...
Repair of concrete pavement surfacing with cement mortar finishing coats
The surfaces of concrete carriageways are subject to continuous wear due to the action of traffic and also to that of frost and the application of de-icing salts. The deteriorative damage affecting the concrete can range from mere surface wear by abrasion to loosening oi the structure of the material...
Use of new road materials (industrial wastes) in mixes for sub-bases
The replacement of traditional aggregates (limestone) by crushed blastfurnace slag or LD steelmaking slag in lean concrete and in cement-stabilized hardcore was investigated. The effect of adding fly-ash to mixes of the conventional type was also studied. For mixes of equal composition (in parts by volume) and equal grading (by...